-
Frameless Glass Expanses with Built-In Site Adjustability
Fixed panels reach heights up to 12 feet and widths up to 12 feet as standard. Vertical, horizontal, or crossed mullions can be specified to divide large glass panels. Butt glazing eliminates vertical framing members entirely, creating clear sight lines and wide glass expanses. Butt-glazed panels can be configured at 90-degree inside and outside corners.
All fixed panels include built-in height adjusters and sidewall adjusters that accommodate out-of-level floors and out-of-plumb walls without custom shimming. When ganged together, panels connect with automatic 1/8-inch reveals using manufacturer-designed connectors. Segmented curved wall configurations are also possible for non-rectangular floor plans.
Authorized PK-30 Demountable Wall Distributor in New York City
PK-30 Glass Partition Walls and Demountable Systems for NYC Commercial Projects
Moderco NYC is the authorized PK-30 distributor for demountable wall systems in the New York City metro area. Locally manufactured glass partition walls, sliding doors, and swing doors from a factory 90 miles north of Manhattan, backed by local installation and service.
About PK-30 Demountable Walls
The Only Locally Manufactured Demountable Wall System in the Portfolio
PK-30 System manufactures glass partition wall systems and architectural doors from its factory in High Falls, New York. The same unified aluminum profile platform used for PK-30’s operable walls is used for fixed panels, sliding doors, and swing doors, creating a consistent design language across an entire project. PK-30 is the only demountable wall manufacturer in the Moderco NYC portfolio with a production facility in New York State.
One Aluminum Profile System for Both Demountable and Operable Walls
PK-30 is represented by Moderco NYC for both demountable wall systems (fixed panels, sliding doors, swing doors) and operable partition systems (Centerfold, Variofold, Variotec). Projects that require both product categories can use the same aluminum profiles throughout, ensuring visual consistency between permanent glass partitions and movable room dividers. All components are extruded from high-grade 6063 series aluminum alloy with 62% recycled content. For PK-30’s operable wall product lines, visit our PK-30 operable walls page.
PK-30 Demountable Product Range
Three Product Lines for Glass Partitions, Sliding Doors, and Swing Doors
PK-30 manufactures demountable glass partition walls and architectural doors across three product lines. Each line uses the same aluminum profile system and accepts any 1/4-inch to 1/2-inch panel material for unlimited design choices.
Fixed Panels
Full-height glass partition panels up to 12 feet tall and 12 feet wide. Vertical, horizontal, or crossed mullions. Butt glazing for frameless glass expanses. Built-in height and sidewall adjusters. Segmented curved wall configurations available. Panels gang together with automatic 1/8-inch reveals.
Sliding Doors
Architectural sliding glass and aluminum doors up to 10 feet wide and 12 feet tall. Maximum panel weight 550 lbs. FSB full mortise locks standard with North American cylinder compatibility. Available in single, bi-parting, bypassing, pocket, and telescoping configurations. Soft-close option available.
Swing Doors
Center pivot and offset pivot doors up to 12 feet tall. Factory-finished flush wood doors with particle board or FSC certified core. Pre-machined for hardware at the factory. FSB lever designs standard. Integrates with PK-30 aluminum jambs, drywall trim, or PK-30 transom panels.
Glass Partition Panels
Fixed Panels. Up to 12 Feet Tall with Butt Glazing and Curved Configurations
PK-30 fixed panels are the foundation of the demountable glass partition wall system. They provide full-height glass division with built-in adjustability for out-of-level or out-of-plumb site conditions, a common requirement in NYC’s existing commercial building stock.
Architectural Sliding Doors
Sliding Doors. Up to 10 Feet Wide with FSB Hardware Standard
PK-30 sliding doors integrate seamlessly with the fixed panel system, providing passage through glass partition walls without breaking the design language. The same aluminum profiles are used for both door frames and partition frames.
-
Multiple Configurations from 176 to 550 Pounds Per Panel
PK-30 sliding doors reach up to 10 feet wide and 12 feet tall as standard. Four hardware tiers cover different weight ranges: standard 80/B (176 lbs), 120/B (264 lbs), 150/B (330 lbs), and heavy-duty 250/B (550 lbs). All hardware is manufactured by Hawa AG (Switzerland) for precision and durability.
Available configurations include single sliding, bi-parting coplanar, bypassing, pocket doors, and double or triple telescoping with follower mechanisms. FSB full mortise sliding door locks are standard on all configurations with North American cylinder compatibility for building keyway matching. Additional hardware includes PK-30 integral flush pulls, glass-mounted bar pulls, bottom rail locks, and electromagnetic locks.
Pivot and Swing Doors
Swing Doors. Center Pivot and Offset Pivot with Factory-Finished Wood Options
PK-30 swing doors complete the demountable partition system by providing hinged entry points that match the aluminum profile aesthetic. Both glass and wood door options are available, with all hardware pre-machined at the factory.
-
Factory-Machined Doors with FSB Lever Hardware
PK-30 swing doors reach heights up to 12 feet with two pivot configurations. Center pivot hinges allow the pivot point to be adjusted along the width of the door. Offset pivot hinges provide wide throw for extra clearance applications. Both hinge types are designed and manufactured by PK-30.
Factory-finished flush wood doors use particle board or FSC certified particle board core construction. Doors arrive at the job site pre-machined for locks, hinges, and flush bolts, saving installation time and ensuring hardware precision. FSB full mortise ANSI A Grade 1 locks are available in all standard functions with an extensive selection of levers and knobs in various metals and finishes.
Finish Options
Aluminum Framing with Unlimited Panel Material Choices
PK-30’s aluminum profile system is designed to accept any panel material from 1/4-inch to 1/2-inch thick, giving architects full control over the appearance of glass partition walls while using PK-30’s structural framing and hardware.
-
Standard Anodized Frames with Custom Powder Coat and Unlimited Infill Options
Standard frame finishes are clear satin anodized and black satin anodized, both compliant with AAMA 611 specifications. Custom powder-coat colors are available per special order, compliant with AAMA 2603. All aluminum components use PK-30’s proprietary clear silicone gasket system that cushions panel material and allows snap-in installation for easy field replacement.
PK-30 Demountable Walls in New York City
Manufactured 90 Miles from Manhattan with a Dedicated NYC Office
PK-30 is the only demountable wall manufacturer in the Moderco NYC portfolio with a production facility in New York State. The factory in High Falls, NY is approximately 90 miles north of Manhattan, and the company maintains a New York City office for local specification support.
-
Local Manufacturing for Shorter Lead Times and NYC Project Experience
The proximity of PK-30’s factory to the New York City market provides logistical advantages that imported or distant manufacturers cannot match. Shorter shipping distances reduce lead times and transportation costs. The NYC office at 212.473.8050 provides direct access to PK-30’s engineering and sales team for specification support, shop drawing review, and project coordination.
Local NYC Service
PK-30 Demountable Wall Installation and Maintenance by a New York City Team
Moderco NYC provides full-service installation and ongoing maintenance for every PK-30 demountable wall system sold in the NYC metro area. The proximity of PK-30’s factory means replacement parts and custom components arrive faster than from any other manufacturer in the portfolio.
-
Factory-Glazed Products with Local Installation Crews
Every PK-30 demountable installation through Moderco NYC includes shop drawing review with PK-30’s engineering team, pre-installation site measurement, frame installation, glass and panel hanging, door hardware calibration, and final inspection. PK-30 products arrive factory-glazed to the greatest extent possible, reducing on-site labor and ensuring quality control.
Frequently Asked Questions
Common Questions About PK-30 Demountable Glass Partition Walls
Answers to the questions architects and contractors ask most when evaluating PK-30 demountable wall systems for NYC projects.
PK-30’s aluminum framing system accepts any panel material from 1/4-inch to 1/2-inch thick. Common specifications include tempered glass (clear, tinted, frosted, etched, sand-blasted), laminate panels, fabric-wrapped acoustic panels, wood veneer, back-painted glass, and solid-core panels. The choice of infill material determines the acoustic and fire performance of the installed partition.
Yes. PK-30 offers butt glazing for frameless glass expanses without vertical framing members. Butt-glazed panels can be up to 12 feet wide and configured at 90-degree inside and outside corners. This creates clear sight lines and wide expanses of uninterrupted glass.
PK-30 products are manufactured in High Falls, New York, approximately 90 miles north of Manhattan in the Hudson Valley. The company also maintains a New York City office at 212.473.8050 for local specification support and project coordination. PK-30 is the only manufacturer in the Moderco NYC portfolio with a production facility in New York State.
Yes. PK-30 manufactures both demountable wall systems (fixed panels, sliding doors, swing doors) and operable partition systems (Centerfold, Variofold, Variotec). Both product categories use the same aluminum profile system for visual consistency across a project. For PK-30’s movable partition product lines, visit our PK-30 operable walls page.
PK-30 offers sliding doors (up to 10 feet wide, 550 lbs max) and swing doors (center pivot or offset pivot, up to 12 feet tall). Sliding doors are available in single, bi-parting, bypassing, pocket, and telescoping configurations. Swing doors are available in glass or factory-finished flush wood with FSB full mortise locks standard.
Yes. PK-30 is a member of the U.S. Green Building Council. All aluminum components are extruded from 6063 series alloy with 62% recycled content. Products contribute to multiple LEED v4/v4.1 credits including Environmental Product Declarations, Sourcing of Raw Materials, Material Ingredients, Design for Flexibility, Low-Emitting Materials, and Daylight. PK-30 provides manufacturer’s letters certifying LEED credit compliance upon request.
What Our Clients Say
NYC Professionals on Working with Moderco NYC and PK-30 Demountable Walls
Feedback from architects, contractors, and facility managers who have specified or installed PK-30 demountable wall systems through Moderco NYC.
Specify PK-30 Demountable Walls for Your NYC Project
Ready to Evaluate PK-30 Glass Partition Walls for Your Next Project
Share your project details and our team will recommend the right PK-30 configuration based on your glass type, door requirements, panel dimensions, and timeline. Local consultation, specification support, and installation across the NYC metro area.