-
Minimal Aluminum Framing with Full Glass Transparency
MONO uses 10mm or 12mm glass panels in anodized or painted aluminum frames. The system is characterized by a small selection of components that create an elegant and sophisticated spatial division while maximizing daylight penetration across the floor plate. Door options include sliding and hinged configurations in glass, solid core wood, or veneer finishes.
MONO integrates seamlessly with TEK (solid frame-and-tile) and ANTA (storage) systems, allowing architects to combine all-glass sections with opaque sections and built-in storage within a single partition run. Hardware is customizable based on project specifications. The full CWS finish library applies to MONO’s aluminum frame components.
Authorized CWS Demountable Wall Distributor in New York City
CWS Demountable Glass Partitions and Modular Wall Systems for NYC Commercial Projects
Moderco NYC is the authorized Contract Wall Solutions distributor for demountable wall systems in the New York City metro area. Five product lines, 130+ finish options, and the only demountable office partition ecosystem in our portfolio with integrated cable management and storage.
About CWS Demountable Walls
The Deepest Demountable Wall Portfolio and Largest Finish Library in the Moderco NYC Lineup
Contract Wall Solutions (CWS) manufactures five demountable glass partition and modular wall system products from its facility in Vaughan, Ontario. The CWS demountable line covers all-glass partitions, solid frame-and-tile walls with cable management, monolithic glass systems, double-pane acoustic glass, and integrated storage. No other manufacturer in the Moderco NYC portfolio offers this range of demountable configurations from a single source.
CWS for Both Demountable and Operable Walls
CWS is represented by Moderco NYC for both demountable wall systems (MONO, TEK, SLIM, GEMELLI, ANTA) and operable partition systems (FLEXX Scena, Flow, Soul, Luma). Projects that require both product categories from a single manufacturer can source everything through one distributor with coordinated finishes across both product lines. CWS carries the largest finish library in the portfolio with over 130 surface options. For CWS’s operable wall product lines, visit our CWS operable walls page.
CWS Demountable Product Range
Five Product Lines for Every Demountable Glass Partition and Office Wall Requirement
CWS manufactures demountable glass partitions and modular wall systems across four primary product lines plus an integrated storage system (ANTA) that connects with MONO and TEK installations. Each product addresses a different balance of visual transparency, acoustic performance, and infrastructure requirements.
MONO
All-glass demountable partition designed for maximum daylight penetration. 10mm or 12mm glass in anodized or painted aluminum frames. Sliding or hinged doors in glass, solid core wood, or veneer. Integrates seamlessly with TEK and ANTA for mixed configurations within a single project.
TEK
Frame-and-tile demountable wall system with large internal cavities for voice, power, and data routing. Easily reconfigurable post-occupancy. Surface finishes include laminate, veneer, painted MDF, back-painted glass, laminated steel, and fabrics. Integrates with MONO and ANTA. The only demountable system in the portfolio with built-in cable management.
SLIM
Monolithic all-glass demountable wall with a 27mm rectangular aluminum profile. High-performance acoustic balloon gaskets secure 10mm or 12mm tempered or laminated safety glass. Sliding or hinged doors in solid core wood, laminate, or framed/frameless glass. Made-to-order for project-specific configurations.
GEMELLI
Double-pane demountable glass wall with a 4-inch profile for higher acoustic performance. Single offset or double pane glass options in 10mm or 12mm tempered or laminated safety glass. Positioned as the highest acoustic performer in the CWS demountable glass line. Made-to-order for project-specific configurations.
All-Glass Partition
MONO. Pure Glass Aesthetics with Maximum Daylight Penetration
MONO is CWS’s minimalist all-glass demountable partition. It is designed for environments where visual transparency and natural light are the primary specification drivers, with the partition serving as a near-invisible division between spaces.
Frame-and-Tile with Cable Management
TEK. The Only Demountable System in the Portfolio with Integrated Cable Routing
TEK is CWS’s frame-and-tile demountable wall system. Its defining feature is large internal cavities that route voice, power, and data cabling with full post-occupancy accessibility. No other demountable wall manufacturer in the Moderco NYC portfolio offers this capability.
-
Reconfigurable Walls with Voice, Power, and Data Infrastructure
TEK uses a structural frame with removable tile surfaces that can be reconfigured without demolition. The internal wall cavity is specifically dimensioned to accommodate voice, power, and data cabling with full accessibility after the wall is installed. When a department reorganizes or IT infrastructure changes, TEK walls can be opened, recabled, and closed without removing the partition from service.
Surface finish options for TEK tiles include laminate, veneer, painted MDF, back-painted glass, laminated steel, and fabrics in anodized or painted aluminum framing. TEK integrates with MONO (glass) and ANTA (storage), allowing a single partition run to combine solid cable-managed sections with transparent glass sections and built-in shelving.
TEK is specified for technology-driven corporate offices, trading floors, and any environment where cabling infrastructure changes more frequently than the physical layout of the space.
Monolithic Glass
SLIM. Seamless Glass with a 27mm Aluminum Profile
SLIM is CWS’s monolithic all-glass demountable wall. It achieves the slenderest profile in the CWS demountable line at just 27mm, creating a seamless glass environment with minimal visible framing.
-
High-Performance Acoustic Gaskets in the Slimmest CWS Profile
SLIM uses a 27mm high rectangular extruded aluminum profile with a snap-on pressure cover that locks 10mm or 12mm tempered or laminated safety glass into place. High-performance acoustic balloon gaskets are integrated into the glazing system to provide acoustic separation without increasing the visible frame dimension.
Door options include sliding and hinged configurations in solid core wood, laminate, and framed or frameless glass. Frame finishes are available in anodized aluminum. SLIM is compatible with all other CWS product lines, allowing it to be combined with MONO, TEK, GEMELLI, or ANTA within a single project.
SLIM is manufactured on a make-to-order basis for project-specific dimensions and configurations. It is specified for executive floors, boutique hospitality environments, and high-end commercial spaces where the glass partition must be as visually minimal as possible.
Acoustic Double-Pane Glass
GEMELLI. Double-Pane Glass for Higher Acoustic Performance
GEMELLI is CWS’s highest acoustic demountable glass wall. Its 4-inch profile accommodates single offset or double pane glass configurations, providing acoustic separation that exceeds single-glass systems while maintaining full visual transparency.
-
4-Inch Profile with Single Offset or Double Pane Glass Options
GEMELLI uses a 4-inch wide aluminum profile with 10mm or 12mm tempered or laminated safety glass in single offset or double pane configurations. The wider profile and air gap between glass panes provide higher acoustic performance than single-glass systems like MONO and SLIM, making GEMELLI the preferred specification for conference rooms, private offices, and healthcare environments where sound isolation and visual transparency are both required.
Door options include sliding and hinged configurations in solid core wood, laminate, and framed or frameless glass. Frame finishes are available in anodized aluminum on a project-specific basis. GEMELLI is compatible with all other CWS product lines and is manufactured on a make-to-order basis.
Finish Options
The Largest Finish Library of Any Demountable Wall Manufacturer in Our Portfolio
CWS offers over 130 surface finish options across its demountable wall product lines. No other demountable wall manufacturer in the Moderco NYC portfolio approaches this level of finish variety. Architects and interior designers specify CWS when the demountable partition must integrate seamlessly with a controlled interior palette.
-
73 Aluminum Frame Finishes, 57 Panel Finishes, and Premium Surface Materials
Aluminum frame finishes include 7 standard anodized and painted options, 9 aluminum wood prints, 19 RAL colors, and 33 specialty finishes across the Spark, Satin, Silk, and Weathering Steel series. TEK panel surface options add 28 solid colors, 3 fabric effects, and 26 wood patterns for a total of 57 additional tile finishes. ANTA storage components are available in laminates and veneers to match TEK and MONO installations. The same finish ecosystem applies across CWS’s demountable and operable wall product lines, ensuring finish continuity on projects that use both product categories.
CWS Demountable Walls in New York City
Design-Forward Demountable Partitions for NYC's Architecture and Corporate Markets
The CWS demountable wall ecosystem is specified for environments where the partition system must meet the design standards of the surrounding interior. Moderco NYC brings CWS’s finish-led demountable approach to the New York City market with local specification support and installation.
-
Corporate Headquarters, Executive Floors, and Design-Led Office Environments
New York City’s corporate headquarters and executive floors demand demountable glass partitions and modular office wall systems that meet exacting design and acoustic standards. Standard demountable systems with limited finish options cannot satisfy these specifications. The CWS product ecosystem, with over 130 finish options, integrated cable management (TEK), built-in storage (ANTA), and four distinct glass partition types, fills this gap in the NYC market. Architects and interior designers who specify CWS through Moderco NYC receive factory-direct engineering support and finish coordination through a single local point of contact.
Local NYC Service
CWS Demountable Wall Installation and Maintenance by a New York City Team
Moderco NYC provides full-service installation and ongoing maintenance for every CWS demountable wall system sold in the NYC metro area. CWS’s factory-engaged approach means our installation team coordinates directly with CWS engineering throughout the project.
-
Factory-Engaged Coordination from Specification to Commissioning
Frequently Asked Questions
Common Questions About CWS Demountable Glass Partitions and Wall Systems
Answers to the questions architects and contractors ask most when evaluating CWS demountable wall systems for NYC projects.
MONO is an all-glass demountable partition for maximum daylight. TEK is a frame-and-tile system with internal cable management for voice, power, and data. SLIM is a monolithic glass wall with the slimmest profile (27mm) in the CWS line. GEMELLI is a double-pane glass wall with a 4-inch profile for higher acoustic performance. All four products integrate with each other and with ANTA storage within a single project.
Yes. TEK is specifically designed with large internal cavities for voice, power, and data routing with full post-occupancy accessibility. TEK is the only demountable system in the Moderco NYC portfolio with this capability. MONO, SLIM, and GEMELLI do not have internal cable routing and require external conduit or above-ceiling cable paths.
CWS offers over 130 surface finish options. Aluminum frame finishes include 7 standard anodized and painted options, 9 aluminum wood prints, 19 RAL colors, and 33 specialty finishes across the Spark, Satin, Silk, and Weathering Steel series. TEK panel surfaces add 57 options in solid colors, fabric effects, and wood patterns. ANTA storage is available in laminates and veneers. The same finish library applies to both CWS demountable and operable wall products.
Yes. CWS manufactures both demountable wall systems (MONO, TEK, SLIM, GEMELLI, ANTA) and operable partition systems (FLEXX Scena, Flow, Soul, Luma). Both product categories share the same finish library, ensuring finish continuity on projects that use both product types. For CWS’s operable wall product lines, visit our CWS operable walls page.
ANTA is CWS’s integrated storage wall system. It maximizes storage by utilizing vertical space in a minimal footprint and integrates directly with MONO and TEK installations. ANTA is available in laminates and veneers to match the surrounding partition finishes. It is not a standalone partition system but an accessory that adds storage functionality to CWS demountable wall projects.
Yes. Moderco NYC is the authorized CWS distributor for the New York City metro area. We carry the full FLEXX operable wall line and provide local consultation, specification support, installation, and maintenance across Manhattan, Brooklyn, Queens, the Bronx, Long Island, and New Jersey.
What Our Clients Say
NYC Professionals on Working with Moderco NYC and CWS Demountable Walls
Feedback from architects, contractors, and facility managers who have specified or installed CWS demountable wall systems through Moderco NYC.
Specify CWS Demountable Walls for Your NYC Project
Ready to Evaluate CWS Demountable Glass Partitions for Your Next Project
Share your project details and our team will recommend the right CWS demountable configuration based on your transparency requirements, acoustic targets, cable management needs, finish preferences, and timeline. Local consultation, specification support, and installation across the NYC metro area.